Class II Type C1 Biosafety Cabinet

What is the Class II Type C1 Biosafety Cabinet?

A Class II Type C1 biosafety cabinet is convertible, switching between recirculating and exhaust modes as the workload changes. It gives flexibility where both chemical and biological work occur in one cabinet.

Overview

The C1 design fits dampers so the proportion of exhaust and recirculation can be changed, in some models while the cabinet is running. In recirculating mode it behaves like an A2, and in exhaust mode it sends a larger fraction of air through a dedicated duct, approaching B1 or B2 behaviour for chemical removal. A controller, airflow sensors and indicators show the current mode, and the duct and exhaust fan are sized for the maximum exhaust setting. Inflow remains 0.38–0.51 m/s and downflow 0.25–0.35 m/s in both modes. Because mode changes affect airflow balance, the cabinet must be certified in each mode and the exhaust fan interlocked. C1 is useful in multipurpose laboratories where chemical use is occasional, but each mode must be validated for the work performed.

How does it work?

A Class II cabinet maintains three protective airflows at once. Room air is drawn through the front grille at an inflow velocity of about 0.38–0.51 m/s, forming an air curtain that keeps aerosols inside. A second stream of HEPA-filtered air flows downward over the work zone at about 0.25–0.35 m/s to protect the sample from contamination. Exhaust air passes a second HEPA filter before recirculation or discharge. The proportion recirculated defines the type: Type A2 returns about 70 % and exhausts 30 %, Type B1 exhausts about 70 %, and Type B2 exhausts 100 % without recirculation. A pressure or airflow sensor and alarm warn of loss of flow, and a negative-pressure plenum may surround the contaminated ductwork. Filter integrity and airflow are verified by aerosol testing at certification. The work surface is stainless steel, and a sash limits the operator's access to the work zone.

What are the key features?

• Dampers switch between recirculating and exhaust modes
• Mode indicator and airflow sensors
• Inflow 0.38–0.51 m/s in both modes
• Duct sized for maximum exhaust setting
• Fan interlock and airflow alarm
• Certification required in each mode

What are the technical specifications?

A typical class ii type c1 biosafety cabinet configuration offers cabinet type of Class II Type C1 (convertible), inflow velocity of 0.38–0.51 m/s, downflow velocity of 0.25–0.35 m/s, modes of Recirculating and exhaust, exhaust range of 30–100 % of airflow and HEPA grade of H14 supply and exhaust. Values are indicative of the product class; the exact figures for each configuration are confirmed on the quotation and the calibration documents supplied with the instrument.

Which applications is it used for?

The Class II Type C1 Biosafety Cabinet is used in multipurpose research laboratories, occasional chemical work with cell culture, shared core facilities and flexible teaching laboratories. Across the wider Class II Cabinets class, laboratories also deploy it for cell culture and aseptic technique, clinical microbiology and diagnostics and pharmaceutical sterility testing.

Which standards and certifications apply?

Relevant standards and methods include EN 12469 (biosafety cabinets), NSF/ANSI 49 (biosafety cabinetry), ISO 14644-1 (cleanroom classification), EU GMP Annex 1 (sterile manufacturing), GB 19489 (biosafety laboratory requirements) and IEC 61010-1. Certification candidates for this model are CE and ISO 9001 manufacturing; each is to be confirmed for the specific configuration before shipment, and certificates are supplied only where they have been issued.

Place the cabinet at least 30 cm from walls, doors and air diffusers, since cross-drafts above 0.15 m/s degrade the air curtain. Move arms slowly and avoid rapid movements that break the inflowing air. Do not place items over the front grille, because this blocks inflow and reduces protection, and keep large equipment towards the rear. Recertify at least annually and after filter change, fan repair or relocation, using aerosol leak, airflow and inflow velocity tests. For B2 and ducted types, confirm the exhaust fan is dedicated and interlocked, and verify make-up air. Clean surfaces with compatible disinfectants, use UV only as a supplement, and never work with toxic chemicals in an A2 cabinet without a vapour assessment.

How do I select the right Class II Type C1 Biosafety Cabinet?

Choose Type C1 when one cabinet must serve both cell culture and occasional chemical work, and a dedicated duct is available. Confirm certification is done in each mode. RFQ: modes required, maximum exhaust, duct design, controller and interlock.

How does it compare with other Class II Cabinets variants?

Start from the biological risk assessment and the chemicals used. Type A2 suits most microbiology, cell culture and sterile work where no volatile toxic chemicals or radionuclides are involved. Choose Type B2 when volatile toxic chemicals, radionuclides or large amounts of vapour must be exhausted to atmosphere without recirculation. Type B1 is used when small amounts of volatile chemicals are handled and a dedicated exhaust exists. Type A1 is limited to non-toxic, non-volatile work because its plenum is under positive pressure. Type C1 is convertible and can switch between recirculating and exhaust modes as the workload changes. Confirm internal width and height for equipment, decide on recirculating or ducted exhaust, and verify certification to EN 12469 or NSF/ANSI 49. Plan annual recertification and filter replacement.