Garment Cabinet with Shoe Storage and Bench

What is the Garment Cabinet with Shoe Storage and Bench?

This garment cabinet combines hanging space for coveralls with a shoe compartment and a seat bench. It supports gowning-room layouts where staff change footwear and garments in one station. It suits shared gowning stations.

Overview

The unit has an upper hanging compartment, a lower perforated shoe rack and a stainless steel bench, dimensions about 900–1800 mm wide, 500–600 mm deep and 1800–2000 mm tall. Shoe storage often uses sloped, perforated shelves that allow air flow and cleaning. The bench seat is about 450 mm high and supports 150 kg. Construction is 304 stainless steel, with optional UV lamps and filtered ventilation in the garment section. Doors are lockable, and compartments can be assigned per person. The design reduces floor contamination by keeping street shoes separate from clean shoes, and supports standardized gowning steps defined in the gowning SOP.

How does it work?

A garment cabinet provides enclosed storage with controlled airflow so that garments remain dry and particle-free. Basic units have stainless steel or powder-coated steel shelves and hangers with louvred or perforated doors. Ventilated versions draw room air through a prefilter and HEPA filter and circulate it over the garments, keeping positive pressure inside so dust cannot enter. UV-C lamps at 254 nm irradiate hanging garments for surface disinfection, with timers and door switches for safety. Some units include heated drying or nitrogen purge for sterile garments. Doors are glazed for visibility, and interiors are smooth for wipe-down. Units are sized for 1 to 6 persons and supplied as single or multi-door freestanding cabinets.

What are the key features?

• Hanging compartment plus perforated shoe rack
• Stainless steel bench seat rated to 150 kg
• Sloped shelves for air flow and cleaning
• Lockable compartments assignable per person
• Optional UV and filtered ventilation
• 304 stainless steel construction

What are the technical specifications?

A typical garment cabinet with shoe storage and bench configuration offers width of 900–1800 mm, depth of 500–600 mm, height of 1800–2000 mm, bench height of ≈ 450 mm, bench load rating of 150 kg and shoe capacity of 4–12 pairs. Values are indicative of the product class; the exact figures for each configuration are confirmed on the quotation and the calibration documents supplied with the instrument.

Which applications is it used for?

The Garment Cabinet with Shoe Storage and Bench is used in gowning rooms, pharmaceutical plants, electronics factories and food production. Across the wider Garment Cabinets class, laboratories also deploy it for gowning rooms, pharmaceutical production and electronics cleanrooms.

Which standards and certifications apply?

Relevant standards and methods include ISO 14644-1 (cleanroom classification), ISO 14644-5 (cleanroom operations), EU GMP Annex 1 (sterile manufacturing), GB 50073 (cleanroom design code), IEST-RP-CC003 (garment system considerations) and IEC 61010-1. Certification candidates for this model are CE and ISO 9001 manufacturing; each is to be confirmed for the specific configuration before shipment, and certificates are supplied only where they have been issued.

Place garment cabinets in the gowning vestibule or clean-side change room, away from draughts and wet areas. Clean the exterior and interior with cleanroom-compatible disinfectants at defined intervals, and replace prefilters every 3–6 months. UV lamps lose intensity after about 8000 hours and do not treat shadowed fabric folds, so they supplement and do not replace laundering. Define garment rotation, cleaning and sterilization cycles, and log them. Do not hang wet garments, and avoid storing personal items in the cabinet. Verify that airflow does not raise particles within the gowning room.

How do I select the right Garment Cabinet with Shoe Storage and Bench?

Choose the combined unit where gowning steps include a shoe change and floor space is limited. RFQ: person count, shoe pairs, bench length, UV option and lock. Final selection should be confirmed against the facility design specification and supplier test data.

How does it compare with other Garment Cabinets variants?

Choose by the cleanliness of garments to store and the risk of contamination. For general ISO 7–8 areas, a ventilated steel cabinet may suffice; for sterile or ISO 5–6 garments, use HEPA-ventilated or sterile-purged units. Count the garments per shift and choose the number of compartments or hanger positions, noting coverall volume of about 0.05 m3 per garment. Check door type, glazing and locks, as well as whether UV disinfection is helpful. Verify materials, stainless steel 304 for pharma and powder-coated steel for electronics. Confirm dimensions for gowning-room layout, typical widths 600–1800 mm, and the electrical supply.