Wall Bench with Reagent Shelf and Service Panel

What is the Wall Bench with Reagent Shelf and Service Panel?

This wall bench adds a fixed reagent shelf and a wall-mounted service panel above the worktop, bringing electricity, gas, water and data to the bench while keeping reagents within reach. It is widely used in synthesis and analytical laboratories.

Overview

The wall panel carries sockets, gas and water taps, vacuum and compressed air outlets and data ports, typically at 1100–1300 mm above floor. A one- or two-tier reagent shelf in glass or powder-coated steel spans the bench and may include LED lighting at about 500 lux. The panel has access doors or removable covers for maintenance, and drip cups catch tap leakage. Service lines are color-coded by gas type, and isolation valves are fitted in accessible locations. The bench beneath may use cabinets or cantilever frames. Because the services are fixed, the layout is less flexible but the workstation is complete and tidy. Fixtures must follow gas and electrical codes.

How does it work?

A wall bench consists of a worktop supported by base cabinets, a frame or cantilever brackets, and is fixed to the wall to prevent tipping. Services are delivered through wall-mounted panels, service strips or pipe-chase ducts running behind the bench, and accessed via sockets and taps above the worktop. Standard depth is 650–750 mm, length in 600 mm modules, with an upstand or splashback at the rear. Reagent shelves, glazed wall cabinets and instrument shelves may be mounted above. The wall construction must carry the fixing loads, and the rear void should permit pipework access. Worktops are chosen from epoxy resin, phenolic resin, stainless steel or ceramic according to chemical exposure and cleanliness requirements.

What are the key features?

• Wall panel with sockets, gas, water, vacuum and data
• One- or two-tier glass or steel reagent shelf
• LED task lighting at about 500 lux
• Removable covers for service access
• Drip cups and color-coded service lines
• Accessible isolation valves for each service

What are the technical specifications?

A typical wall bench with reagent shelf and service panel configuration offers panel height of 1100–1300 mm above floor, shelf tiers of 1 or 2, shelf load of 15–25 kg per metre, electrical outlets of 2–4 per metre, 220–240 V, gas and water taps of 1–2 per station and lighting of LED, ≈500 lux. Values are indicative of the product class; the exact figures for each configuration are confirmed on the quotation and the calibration documents supplied with the instrument.

Which applications is it used for?

The Wall Bench with Reagent Shelf and Service Panel is used in synthesis laboratories, analytical laboratories, teaching laboratories and reagent preparation areas. Across the wider Wall Benches class, laboratories also deploy it for chemistry laboratories, quality control laboratories and instrument rooms.

Which standards and certifications apply?

Relevant standards and methods include SEFA 8 (laboratory grade casework), EN 13150 (laboratory workbenches), GB 24820 (laboratory furniture), EN 14056 (laboratory furniture design and installation) and IEC 61010-1 (electrical safety, room services). Certification candidates for this model are ISO 9001 manufacturing, SEFA 8 test report and CE (electrical services, where fitted); each is to be confirmed for the specific configuration before shipment, and certificates are supplied only where they have been issued.

Check the wall before installation: masonry or concrete can take direct fixings, while stud or plasterboard walls need reinforcement. Mark and isolate services behind the bench, and provide access panels so that valves and cables can be reached without removing worktops. Seal the worktop to the wall with chemical-resistant silicone, and fit an upstand where spill containment matters. Verify electrical protection, including RCDs on socket circuits, and keep gas shut-off valves accessible. Inspect fixings, hinges, drawer runners and seals every six months, and clean surfaces with neutral detergents after chemical contact.

How do I select the right Wall Bench with Reagent Shelf and Service Panel?

Choose this variant when each workstation needs complete services and immediate access to reagents. It suits fixed layouts in chemistry and analytical laboratories. Specify the service types and counts, panel height, shelf tiers and load, lighting, valve positions and compliance with local gas and electrical rules.

How does it compare with other Wall Benches variants?

Choose the wall bench type by the room perimeter and the services available. Base-cabinet benches suit storage-heavy labs, cantilever benches leave floor space for cleaning and mobile units, and benches with integrated sinks or fume hood interfaces create complete wet stations. Decide on the depth: 650 mm saves space, while 750 mm holds larger instruments. Check wall construction, service duct access and ceiling height when planning wall cabinets. Select the worktop material from the chemical list and temperature exposure, and set load ratings for balances, ovens and centrifuges. Confirm that the layout leaves aisles of at least 1.2 m along the bench and respects egress routes.