Mobile Modular Laboratory Bench

What is the Mobile Modular Laboratory Bench?

A mobile modular laboratory bench is a frame-and-worktop unit on locking casters that can be reconfigured or moved between areas. It suits flexible research spaces, pilot plants and teaching rooms where layouts change regularly and services are supplied from overhead or floor panels.

Overview

Mobile modular benches use a rigid tubular steel frame on heavy-duty locking casters rated for the full load, with plug-in service connections for power, data and gas through ceiling-mounted or floor-mounted service panels. Worktops are sized 1200–1800 mm and can be gang-linked to create larger stations. Underbench units such as mobile pedestals and cabinets are attached or stored separately. Castors have total-lock brakes and are typically 100–125 mm diameter to cross thresholds. Static load ratings of 200–400 kg are common, but dynamic loads while moving should be much lower to protect glassware. This design supports flexible lab concepts and quick changeovers, at the cost of some stiffness compared with anchored benches.

How does it work?

A laboratory bench consists of a structural frame, a worktop and usually base cabinets or drawers. Frames are welded or bolted steel, powder-coated or stainless, sized for distributed loads of typically 200–500 kg per linear metre. Worktops are chosen for chemical and thermal exposure: epoxy resin, phenolic resin, solid-surface, ceramic or stainless steel. Reagent shelves, service spines and pop-up sockets carry electricity, gas, vacuum and water, while drop-in sinks and fume-hood interfaces complete the wet-lab workflow. Leveling feet compensate for floor unevenness, and cantilever or modular frames allow reconfiguration. Finish durability depends on powder-coat film thickness, edge sealing and the resistance of the worktop to acids, solvents and heat per standard surface tests.

What are the key features?

• Total-lock swivel casters, 100–125 mm diameter
• Plug-in service connections for power, data and gas
• Gang-linkable worktops for larger stations
• Static load rating about 200–400 kg
• Optional mobile pedestals and under-bench cabinets
• Epoxy, phenolic or laminate top options

What are the technical specifications?

A typical mobile modular laboratory bench configuration offers worktop size of 1200–1800 × 750 mm, working height of 850–900 mm, caster diameter of 100–125 mm total-lock, static load of 200–400 kg, dynamic (moving) load of ≤ 100 kg recommended and frame material of Powder-coated steel tube, 40 × 40 mm. Values are indicative of the product class; the exact figures for each configuration are confirmed on the quotation and the calibration documents supplied with the instrument.

Which applications is it used for?

The Mobile Modular Laboratory Bench is used in flexible research laboratories, pilot plants, teaching and training rooms and temporary project benches. Across the wider Laboratory Benches class, laboratories also deploy it for chemistry teaching and research labs, pharmaceutical QC laboratories and biology and microbiology labs.

Which standards and certifications apply?

Relevant standards and methods include SEFA 8 (laboratory grade casework), EN 13150 (laboratory workbenches), GB 24820 (laboratory furniture, Chinese national standard), ANSI/BIFMA X5.5-style load testing (reference) and ISO 9001 quality management. Certification candidates for this model are ISO 9001 manufacturing, SEFA 8 test report and GREENGUARD-type low emission test; each is to be confirmed for the specific configuration before shipment, and certificates are supplied only where they have been issued.

Plan the room before ordering: floor flatness, door widths, ceiling height, service routes and fume hood positions determine which bench designs are feasible. Anchor tall benches per seismic or safety requirements and level all feet before installing worktops. Seal joints and penetrations with chemical-resistant silicone. Verify electrical safety to IEC 61010-1 room practice and keep services isolated from wet zones. Maintenance is simple: wipe spills promptly, avoid abrasive pads on resin, inspect hinges and drawer runners every six months, and re-seal edges if the coating is breached. Document material resistance charts for safety assessments.

How do I select the right Mobile Modular Laboratory Bench?

Select a mobile modular bench when layouts change often, such as in start-up labs, shared research spaces or training rooms. Avoid it for vibration-sensitive balances or heavy equipment. Specify caster type and rating, worktop material, service connection method, linking requirements, static load and whether brakes must lock all casters.

How does it compare with other Laboratory Benches variants?

Choose by the chemicals and heat the worktop will see first: epoxy resin handles strong acids and solvents, phenolic resin suits general chemistry and teaching, stainless steel suits biology and cleanroom use, and ceramic suits high-temperature work. Then set the load rating, because balances, centrifuges and ovens need rigid frames with vibration control. Decide whether the layout is fixed, height-adjustable or mobile, and whether service spines, sinks or reagent shelves are required. Check total length, depth (typically 750 mm), height (typically 850–900 mm) and accessibility requirements. Finally, verify finish resistance data, edge sealing and manufacturer test reports against SEFA 8 or EN 13150 rather than relying on brochure claims.